Hi,All
I am trying to build the seL4 VMM example for the qemu-arm-virt platform
from seL4/camkes-vm-exmaples. I can build the vmm image successfully, but
I cannot run the image. Here are what I did:
1. I use the "../init-build.sh -DCAMKES_VM_APP=vm_minimal
-DPLATFORM=qemu-arm-virt" command.
2. ninja
After these two steps, the vmm image, capdl-loader-image-arm-qemu-arm-virt
is successfully built. But when I run the generated scripts, ./simulate,
to run the VMM on qemu, the vmm fails to boot up. The error message is
attached below.
I use Ubuntu 20.04 and QEMU emulator version 4.2.1. Do I miss something
here? Do I use the correct version of the building environment? Any help
would be appreciated!
./simulate
./simulate: QEMU command: qemu-system-arm -machine
virt,virtualization=on,highmem=off,secure=off -cpu cortex-a15 -nographic -m
size=2048 -kernel images/capdl-loader-image-arm-qemu-arm-virt
ELF-loader started on CPU: ARM Ltd. Cortex-A15 r2p1
paddr=[61805000..62c02ebf]
No DTB passed in from boot loader.
Looking for DTB in CPIO archive...found at 6192264c.
Loaded DTB from 6192264c.
paddr=[60042000..60043fff]
ELF-loading image 'kernel' to 60000000
paddr=[60000000..60041fff]
vaddr=[e0000000..e0041fff]
virt_entry=e0000000
ELF-loading image 'capdl-loader' to 60044000
paddr=[60044000..6140cfff]
vaddr=[10000..13d8fff]
virt_entry=1880c
Enabling hypervisor MMU and paging
Jumping to kernel-image entry point...
Bootstrapping kernel
Warning: Could not infer GIC interrupt target ID, assuming 0.
available phys memory regions: 1
[60000000..c0000000]
reserved virt address space regions: 4
[e0000000..e0042000]
[e0042000..e0043da9]
[e0044000..e140d000]
[ff000000..ff200000]
Booting all finished, dropped to user space
*<<*seL4(CPU 0)* [decodeUntypedInvocation/205 T0xffc13400 "rootserver"
@1070c]: Untyped Retype: Insufficient memory (1 * 33554432 bytes needed, 0
bytes available).>>*
*<<*seL4(CPU 0)* [decodeUntypedInvocation/205 T0xffc13400 "rootserver"
@1070c]: Untyped Retype: Insufficient memory (1 * 16777216 bytes needed, 0
bytes available).>>*
*<<*seL4(CPU 0)* [decodeUntypedInvocation/205 T0xffc13400 "rootserver"
@1070c]: Untyped Retype: Insufficient memory (1 * 16777216 bytes needed, 0
bytes available).>>*
*<<*seL4(CPU 0)* [decodeUntypedInvocation/205 T0xffc13400 "rootserver"
@1070c]: Untyped Retype: Insufficient memory (1 * 2097152 bytes needed, 0
bytes available).>>*
*<<*seL4(CPU 0)* [decodeUntypedInvocation/205 T0xffc13400 "rootserver"
@1070c]: Untyped Retype: Insufficient memory (1 * 65536 bytes needed, 0
bytes available).>>*
run@main.c:1332 Invalid 'num_vcpus' attribute setting: Exceeds maximum
number of supported nodes. Capping value to CONFIG_MAX_NUM_NODES (1)
install_vm_devices@main.c:704 module name: map_frame_hack
install_vm_devices@main.c:704 module name: init_ram
Loading Kernel: 'linux'
Loading Initrd: 'linux-initrd'
Loading Generated DTB
--------
*Pagefault from [vm0]: read prefetch fault @ PC: 0x4 IPA: 0x4, FSR: 0x6*
*Context:*
*r0: 0x0*
*r1: 0xffffffff*
*r2: 0x4f000000*
*r3: 0x0*
*r4: 0x0*
*r5: 0x0*
*r6: 0x0*
*r7: 0x0*
*r8: 0x0*
*r9: 0x0*
*r10: 0x0*
*r11: 0x0*
*r12: 0x0*
*pc: 0x4*
*r14: 0x0*
*sp: 0x0*
*cpsr: 0x9b*
m--------
main_continued@main.c:1310 Failed to run VM
Halting...
